 Manufacturer | Adtran |
 Manufacturer Part Number | 1200062L1 |
 Manufacturer Website Address | www.adtran.com |
 Product Name | DSU 56/64 DDS CSU/DSU |
 Operating Mode | Dedicated DDS Point-to-PointDedicated DDS Multipoint |
 Diagnostic Features | Local: DTE, DTE/Loop, DTE with test pattern, Loop only, test patternRemote: V.54 with or without 2047 test pattern |
 Ports | Serial V.35 PhysicalRJ-48S |
 Electrical Interface | Serial V.35 |
 Data Transfer Rate | 56Kbps to 64Kbps Network |
 Input Voltage | 115 V AC |
 Frequency | 60 Hz |
 Power Consumption | 4 W |
 Temperature | 0 °C (32 °F) to 50 °C (122 °F) Operating-20 °C (-4 °F) to 70 °C (158 °F) Storage |
 Humidity | Up to 95% Non-condensing |
 Form Factor | DesktopRack-mountable |
 Dimensions | 1.625" Height x 6.5" Width x 8.25" Depth |
 Shipping Dimensions | 4.00" Height x 10.25" Width x 15.5" Depth |
 Weight | 1.5 lb |
 Shipping Weight | 3.31 lb |
 Package Contents | 8-pin to 8-pin modular cableUser manual |
 Additional Information | Provides cost-effective method for termination of DDS servicesInternal power supplyCan be used for point to- point, multi-point, or Frame Relay applicationsEasy to configure; all options set by easily accessible DIP switchesMultiple test and diagnostic featuresReceiver Sensitivity: -45dB at all rates Options: - Set by DIP switch - Loop Rate: 56 or 64 Kbps - CTS: On or Normal - CTS Delay: Short or Long (DSU 56/64) - CD: On or Normal - DSR: On or Normal - Scrambler: On or Off - Anti-Stream: On or Off (DSU 56/64) - RDL: Enable or Disable Line Requirements: - Loop transmission parameters as defined in: - AT&T PUB 62310: Dedicated DDS |
 Certifications & Standards | FCC Part 15 Class A FCC Part 68 UL and CUL Industry Canada CS03 |
 Standard Warranty | 5 Year(s) - North American |