Indicates collision during packet transmission on the port
Per Copper Port:
Link:
Indicates a valid receive link exists
Speed:
Indicates either 10 or 100Mbps operation
Auto:
Indicates port is set for auto-negotiation
FD/Collision:
Indicates collision during packet transmission on the port.
Indicates full duplex or half duplex operation.
Power Description
Input Voltage
12 V DC to 50 V DC
12 V DC
Input Current
0.5 Ato 0.13 A Maximum
Power Consumption
6 W Maximum
Environmental Conditions
Temperature
0 °C (32 °F) to 40 °C (104 °F) Operating
-25 °C (-13 °F) to 70 °C (158 °F) Storage
Humidity
5 to 95% Non-condensing Relative Humidity Storage
5 to 90% Non-condensing Relative Humidity Operating
Altitude
Up to 10000 ft Operating
Up to 10000 ft Storage
Physical Characteristics
Form Factor
External
Dimensions
1" Height x 4.12" Width x 3.75" Depth
Shipping Dimensions
3" Height x 6" Width x 11" Depth
Weight
10.4 oz
Shipping Weight
2.2 lb
Miscellaneous
Package Contents
One AT-FS232 Series Bridging Converter
Four protective feet (for desktop use only)
AC/DC power supply (12VDC model only)
This installation guide
Warranty card
US power cord
Additional Information
Fits the AT-MCR12 rackmount chassis
MAC address table:
8k addresses
Forwarding/filtering rate:
148,880pps for 100Mbps
14,880pps for 10Mbps
Latency:
14.3µsec (64 byte packet,100Mbps full-duplex)
Certifications & Standards
Safety:
Conforms to all standards normally supported by Allied Telesyn products including safety standards UL60950 (cULus), EN60950, EN60825 (TUV) CE Compliant Standard:
![[ Allied Telesis AT-FS232 Media ]](http://ecatalog.flashecom.com/espec/Thumbnail/10009165.jpg)
General Information