 Manufacturer | Supermicro Computer, Inc |
 Manufacturer Part Number | MBD-P4SC8-O |
 Manufacturer Website Address | www.supermicro.com |
 Product Type | Desktop Board |
 Product Name | P4SC8 Desktop Board |
 Packaged Quantity | 1 |
 Package Type | Retail |
 Processor Interface | 1 x µPGA Socket 478 |
 Processor Support | 1 x Pentium 4 (Extreme Edition) Up to 3.4GHz1 x Pentium 4 Up to 3.2GHz1 x Celeron Up to 2.8GHz |
 Processor Class | Pentium 4 (Extreme Edition)Pentium 4Celeron |
 Front Side Bus | 400MHz533MHz800MHz |
 Featured Technologies | Hyper-Threading Technology |
 Chipset | Intel E7210 (Canterwood ES) |
 Total Memory Slots | 4 |
 Memory Slots | 4 x 184-pin DIMM |
 Maximum Memory | 4GB |
 Memory Speed | 400MHz DDR400/PC3200333MHz DDR333/PC2700266MHz DDR266/PC2100 |
 Memory Technology | DDR DRAM |
 Error Checking | ECCNon-ECC |
 Signal Processing | Unbuffered |
 Expansion Slots | 2 x PCI-X 64-bit 66MHz 3.3V DC2 x PCI 32-bit 33MHz 5V DC |
 Graphics Controller | ATi Rage-XL 8MB |
 Network Controller | 1 x Intel 82547GI Gigabit Ethernet 10/100/1000Mbps CSA1 x Intel 82541 Gigabit Ethernet 10/100/1000Mbps |
 SCSI Controller | Adaptec AIC-7902 Dual-channel Ultra320 SCSI |
 Serial ATA Controller | Intel 6300ESB Dual-channel |
 Back-panel Interfaces | 2 x 6-pin mini-DIN (PS/2)1 x 15-pin D-Sub (HD-15) Female VGA2 x 4-pin Type A USB 2.0 USB1 x 9-pin D-Sub (DB-9) Male 16550 UART Serial1 x 25-pin D-Sub (DB-25) Female IEEE 1284 Parallel2 x RJ-45 Network |
 Front-panel Interfaces | 1 x Power LED1 x HDD LED2 x NIC LED1 x Overheat LED1 x Reset Switch1 x On/Off Switch1 x USB Header (Supports 2 x USB ports)1 x SATA LED1 x Key Lock1 x Speaker |
 On-Board Interfaces | 2 x Ultra ATA/100 (ATA-6) IDE1 x SCSI2 x SATA1 x Floppy |
 Additional Ports | 6 x Fan Header1 x COM21 x System Management Bus Header1 x IrDA Header2 x Power Connector - ATX1 x Chassis Intrusion Header1 x Wake-on-LAN1 x Wake-On-Ring |
 Jumpers | J18: Speaker - Pins 3-4 (Onboard Buzzer) J33: VGA Enable/Disable - Pins 1-2 (Enabled) JBT1: CMOS Clear JP1, JP2: CPU Clock Speed - Pins 1-2 (Auto) JP3: OHFan Force On - Open (Disabled) JP8: Watch Dog Reset - Pins 1-2 (WD Reset) JP20: Power Force On - Open (Disabled) JPA3: SCSI Enabled JPL2: GLAN2 - Pins 1-2 (Enabled) JPUSB: USB1/2 Wake Up - Pins 1-2 (Vcc5) JPWAKE: KB/MSPWOn Standby - Pins 1-2 (Vcc5) |
 Voltage Requirements | 12V DC |
 Power Supply Support | ATX |
 Form Factor | ATX |
 Dimensions | 12" Width x 9.5" Depth |
 Package Contents | 1 x P4SC8 Motherboard1 x Manual for P4SC81 x Ultra320 SCSI Manual1 x Pentium 4, 478 Pin CPU Retention Module1 x 9-pin Serial Port Cable1 x ATX Floppy Cable1 x LVD, Ultra320 SCSI Cable1 x ATA 66/100 IDE LP Cable2 x 2 Ft. Amphenol Serial ATA Cable1 x Version 1.10 Chipset Driver CD1 x I/O Shield For Dual LAN |
 Additional Information | Supper I/OSupport for Zero-Channel RAID with Adaptec 2010S ZCR Card BIOS Features: Plug and Play (PnP)PCI 2.3BIOS rescue hot keysHardware BIOS virus protectionUSB Keyboard supportIntel E7210 (Canterwood ES) Chipset contains: Canterwood Memory Controller Hub (MCH) I/O Controller Hub (Hance Rapids 6300ESB ICH)(These two components are interconnected via Hub Interface) |
 System Requirements | 12V DC ATX Power Supply |
 Hardware Monitoring | Other Features: Chassis intrusion detection CPU: Monitors for CPU Cores, +3.3V, +5, ±12V, +3.3V/+5V Standby, VBATCPU Core 3-Phase-switching voltage regulator w/ auto-sense from 0.85V-1.65VAdjustable CPU clock frequency ratio settings (via BIOS)Fan: 3x fans with tachometer monitoringStatus monitor with firmware/software on/off controlTemperature: Monitoring for CPU, chassis, environmentCPU thermal trip supportLED: CPU Overheat LEDSystem Overheat LED+5V standby alert LEDSuspend-state indicator LED |
 Management | APM 1.2ACPI 1.0DMI 2.3 Power-on mode control for AC power loss recoveryInternal/External modem remote ring-onSuspend to RAM (STR)Main Switch Override Mechanism |
 BIOS | Award - 8Mb Flash EEPROM |