TRIPP LITE SMARTPRO 700HG UPS 

Tripp Lite SmartPro 700HG UPS

Product Code: 10061146 Price: Check Latest General Information Manufacturer Tripp Lite Manufacturer Part Number SMART700HG Manufacturer Website Address www.tripplite.com Product Line SmartPro Product Name SmartPro 700HG UPS Product Type Line-interactive UPS Technical Information Plug/Connector Type NEMA 5-15P Receptacles 4 x NEMA 5-15R Switching Time 4 ms Power Description Load Capacity 700VA/450W Input Voltage 110V AC Input Voltage Range 120V AC Single-phase Output Voltage 120V AC Single-phase Frequency 60Hz Filtering EMI/RFI Management Network Manageability SNMP Manageable Optional Overload Protection Resettable circuit breaker Audible Alarms On Battery Overload Low Battery Controls/Indicators Status Indicators 5 front-panel indicator LEDs to show battery charge level, AC line voltage levels, automatic voltage regulation status, UPS load level and replace battery warning Interfaces/Ports Interfaces/Ports 1 x DB-9 1 x USB Battery Information Batteries Sealed Lead-acid Hot-swappable Backup/Run Time 18 Minute(s) 700VA Full-load 42 Minute(s) 350VA Half-load Battery Life 3 Year(s) to 6 Battery Recharge Time 4 Hour(s) Environmental Conditions Temperature 32 °F (0 °C) to 104 °F (40 °C) Operating Humidity 0 to 95% Non-condensing Relative Humidity Operating Physical Characteristics Form Factor Wall-mountable Tower Power Cord/Cable 6 ft Dimensions 12.5" Height x 7" Width x 9" Depth Shipping Dimensions 17.25" Height x 13.25" Width x 11.75" Depth Weight 44 lb Shipping Weight 49 lb Miscellaneous Package Contents SMART700HG Medical Grade UPS System One USB and One DB9 monitoring cable Warranty information Instruction manual Additional Information Ideal UPS protection for applications in medical patient-care areas where UL2601-1 listed medical electrical equipment is required Maintains less than 300 microamps leakage current for UPS and all connected equipment Built-in isolation transformer with faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes Line-interactive voltage regulation corrects brownouts and overvoltages from 81 to 143 volts back to usable 120V output levels, without using battery power Hospital-grade plug and outlets offer added degree of safety and reliability to input/output connections Full line isolation offers a higher degree of safety and prevents operational problems in sensitive electronic equipment Resistant to electrostatic discharge Supports loads up to 700VA / 450 watts 42 minutes half load runtime (with 350VA load), 18 minutes full load runtime (with 700VA load) 4 protected hospital-grade outlets; 6-ft. cord RS-232 and USB monitoring ports for remote monitoring and unattended shutdown SNMP compatible with separate purchase SNMPWEBSOLO ethernet adapter accessory PowerAlert unattended shutdown software available via free download from www.tripplite.com (cabling included) Complete surge protection, line isolation and EMI/RFI noise filtering 2 year product warranty 5 diagnostic LEDs indicate AC present, on battery, voltage correction, overload & battery low/replace Battery replacement door Grounding lug System Requirements TYPICAL APPLICATIONS:UL 2601-1 listed UPS provides ultimate safety and reliability for patient point of care solutions, telemedicine, nurse's stations, wireless communications systems, electronic prescribing applications, medical imaging and mission critical equipment. Not recommended for life support applications. Certifications & Standards UL1778 (USA, Series AGSM700PSR3HG), UL2601-1 (Medical), cUL (Canada), FCC Class A (emissions), Conforms to IEEE 587 / ANSI C62.41 specifications Warranty Standard Warranty 2 Year(s) ^Mfg. Part number: SMART700HG