HOUSING, MOUNT, AND BLOWER 

Housing, Mount, and Blower

Product Code: ACH8HBWM Price: Check Latest MODEL- ACH8HBWM VENDOR- VIDEOLARM, INC FEATURES- HOUSING MOUNT AND BLOWER The ACH8 is an outdoor, environmental housing that can accommodate camera/lens combinations up to 7.5 inch. The body is an attractive white finish with black endcaps. The ACH8 environmental housing shall be constructed from two extruded aluminum (.08 inch wall thickness, white finish) halves and two injectionmolded polycarbonate end caps. A clear polycarbonate viewing window shall be ultrasonically welded to the inside of the front end cap, creating a watertight seal. The rear end cap shall have molded standoffs on the inside surface for easy mounting of the optional blower. The top of the housing shall be hinged from the side to allow accessibility to the camera by one screw in each end cap. Camera adjustment or removal shall be provided via one screw located in the key hole slot on the aluminum camera sled. An optional 25 vA heater may be mounted to the inside of the bottom extrusion, directly behind the viewing window, for defogging and deicing. Four vent plugs (2 in front, 2 in rear) will create a positive air fl ow (front to rear) when the blower is in use. Two watertight strain relief plugs will be located at the rear of the housing for separate coax and power cable entry. * Side hinged for easy access when servicing * Accepts many lens and camera combinations * Designed to meet IP65 standards * Comes with heater and blower MANUFACTURER WARRANTY:  90 DAYS