PCI 10/100/1000MBPS ADAPTER 

PCI 10/100/1000MBPS Adapter

Product Code: DGE530T Price: Check Latest MODEL- DGE-530T VENDOR- D-LINK FEATURES- GigaExpress 10/100/1000Mbps PCI Network Adapter Single port 32-bit/33MHz 10/100/1000 Mbps PCI Adapter. The DGE-530T is a 10/100/1000Mbps copper Gigabit PCI card for servers and workstations. Current systems running at 10Mbps and 100Mbps can be upgraded to Gigabit Ethernet, eliminating network bottlenecks, and increasing productivity. Integrate Gigabit now and you can save time, money, and downtime because the DGE-530T will automatically detect and run at higher speeds when it becomes available. Includes PCI card with standard and low profile brackets. * Cost-Effective, Scalable Migration As an inexpensive alternative solution to fiber-optic, the card allows you to instantly upgrade to Gigabit without requiring you to install new, expensive fiber cables. Gigabit Ethernet uses your existing Category-5 cabling while providing you with 10/100/1000Mbps network speed auto-sensing and full/half duplex auto-negotiation. * Advanced Features and Security The DGE-530T supports SNMP for remote troubleshooting and management, ACPI for lower power consumption, and WoL for remote wake. This helps to lower total cost of ownership (TCO). The card also features on-board screening of VLAN Tagged Ethernet frames, allowing you to assign multiple subnets to each server and isolate devices within each VLAN from the rest of the network for better traffic control and security. It also supports 802.1p Priority Tagging to allow you to prioritize traffic. The card also features embedded flow control and independent FIFO, providing a means to protect against possible data loss during transmission on the network. With the Cable Diagnostic feature, the card will automatically detect whether you have a bad cable, making your troubleshooting task easier. -- SPECIFICATIONs ---------------------------------- STANDARDs - IEEE 802.3 Ethernet, 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.1p Priority Tagging, 802.1q VLANs IEEE 802.3x Flow Control INTERFACE/BUS- 32-bit Local BUS Master 2.1/2.2 Universal Bus Support (3.3V and 5.0V) CONNECTORs - (1) 10BaseT/100BaseTX/1000BaseT/RJ 45 port QoS - Support For 802.1p Priority Tagging VLANs - Support For 802.1q VLANs CABLE DIAGNOSTICS - Advanced Cable Diagnostics (Windows Utility) POWER MANAGEMENT - Wake-On-LAN (WoL) and ACPI 2.0 NETWORK MANAGEMENT- SNMPv1 & Integrated Cable Diagnostics O/S SUPPORT - Windows 98SE/ME/2000/XP Novell Netware 4.2/5.x/6.x Red Hat Linux 7.3 & Later (Kernel 2.4.18-3 and later) (Planned Future Support For Free BSD and Sun Solaris) APPROVALS - CE MarkB, BCCI-B, BSMI, C-Tick, & FCC Class B POWER- +5 volts +/- 5% SIZE - 4.88" x 2.01" WT.- 0.51 lbs. tech@irvine.dlink.com