Canadian Customers go toCanada site

CYBERSERIAL PCI + DOS SINGLE 

Home | Serial I/O Cards | Buy This Product Online  
    
[ CyberSerial PCI + DOS Single - ]
CyberSerial PCI + DOS Single
Product Code: JJP01D11S5
Price: Check Latest


MODEL- JJ-P01D11-S5 VENDOR- SIIG

FEATURES- CyperSerial PCI + DOS- Single
Single serial (16550) port, Universal PCI card design with built-in
32-byte FIFO buffers to work in 32-/64-bit, 3.3V/5V PCI and PCI-X
slots.
Includes CyberSerial PCI+DOS card, Driver CD and Installation guide.
* Supports 32-/64-bit, 3.3V/5V PCI and PCI-X slots
* One high-speed 16550 UART serial port (9-pin) supports data rate up to
230 Kbps.
* Will work as standard RS232 port or with 5V or 12V power output for
devices that require power (such as handheld scanners, table scanners,
POS displays, etc.). Configurable via jumpers with silk-screened settings
on PCB.
* Includes support for DOS, Windows 95/98/98SE/ME/2000/XP/Server 2003, &
Linux Kernel 2.4.x or later.
* IRQ sharing reduces IRQ conflicts
* Built-in 32-byte FIFO buffers dramatically increase data transmit/receive
speed, especially under Windows multitasking environment.
* 4-layer PCB board: separate layers for data & grounding. Greatly reduces
signal noise & loss. Delivers more reliable high-speed data transfers.
* Enhanced bracket design to prevent bending. Connected to PCB with
washered screws for a more secure connection.
* Supports 3.3V operation with 5V tolerance
* Supports PME # (Power Management Event). Allows device to request a
change in system power state (wake up system).
* Use SMT (Surface Mount Technology) type electrolytic capacitor. Low ESR
(Equivalent Series Resistance) aluminum electrolytic capacitor. Offers
much improved noise suppression & achieves higher levels of performance/
reliability.
* Use SMT (Surface Mount Technology) type crystal. Offers cleaner design
than traditional DIP-type crystal. Provides greatly improved grounding,
which reduces EMI emission & improves performance/reliabiilty.

-- SPECIFICATIONs ------------------------------------
INTERFACE/BUS- 32-bit PCI v2.2
CONNECTORS - (1) 9-pin RS-232 Serial port
REQUIREMENTS - Pentium or equivalent computer
available 32-/64-bit PCI or PCI-X slot
DOS, Windows 95/98/98SE/ME/2000/XP/Server 2003
Linux Kernel 2.4.x or later
APPROVALS - FCC B

support@siig.com

MANUFACTURER WARRANTY:  5 YEARS


Goodtails.com